CSS Positioned Layout Module Level 3

W3C Working Draft,

More details about this document
This version:
https://www.w3.org/TR/2022/WD-css-position-3-20221023/
Latest published version:
https://www.w3.org/TR/css-position-3/
Editor's Draft:
https://drafts.csswg.org/css-position-3/
History:
https://www.w3.org/standards/history/css-position-3
Feedback:
CSSWG Issues Repository
Inline In Spec
in Wiki
Editors:
Elika J. Etemad / fantasai (Invited Expert)
Tab Atkins Jr. (Google)
Former Editors:
(Microsoft)
(Microsoft)
Suggest an Edit for this Spec:
GitHub Editor

Abstract

This module contains defines coordinate-based positioning and offsetting schemes of CSS: relative positioning, sticky positioning, absolute positioning, and fixed positioning.

CSS is a language for describing the rendering of structured documents (such as HTML and XML) on screen, on paper, etc.

Status of this document

This section describes the status of this document at the time of its publication. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at https://www.w3.org/TR/.

This document was published by the CSS Working Group as a Working Draft using the Recommendation track. Publication as a Working Draft does not imply endorsement by W3C and its Members.

This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.

Please send feedback by filing issues in GitHub (preferred), including the spec code “css-position” in the title, like this: “[css-position] …summary of comment…”. All issues and comments are archived. Alternately, feedback can be sent to the (archived) public mailing list www-style@w3.org.

This document is governed by the 2 November 2021 W3C Process Document.

This document was produced by a group operating under the W3C Patent Policy. W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy.

1. Introduction

This section is not normative.

The CSS layout algorithms, by default, size and position boxes in relation to each other so that nothing overlaps.

This specification defines several ways to violate these assumptions when needed, moving elements around in ways that can make them overlap other content:

These positioning schemes, controlled by the position property and the inset properties, are powerful but easy to misuse. With appropriate care, they allow many interesting and useful layouts that couldn’t otherwise be achieved with standard layout rules; without, they allow a page to be laid out in an unusable overlapping jumble of content.

1.1. Module Interactions

This module replaces and extends the positioning scheme features defined in [CSS2] sections:

It also replaces and supersedes the inset* property definitions in [CSS-LOGICAL-1] (CSS Logical Properties 1 § 4.3 Flow-relative Offsets: the inset-block-start, inset-block-end, inset-inline-start, inset-inline-end properties and inset-block, inset-inline, and inset shorthands).

1.2. Value Definitions

This specification follows the CSS property definition conventions from [CSS2] using the value definition syntax from [CSS-VALUES-3]. Value types not defined in this specification are defined in CSS Values & Units [CSS-VALUES-3]. Combination with other CSS modules may expand the definitions of these value types.

In addition to the property-specific values listed in their definitions, all properties defined in this specification also accept the CSS-wide keywords as their property value. For readability they have not been repeated explicitly.

2. Choosing A Positioning Scheme: position property

Name: position
Value: static | relative | absolute | sticky | fixed
Initial: static
Applies to: all elements except table-column-group and table-column
Inherited: no
Percentages: N/A
Computed value: specified keyword
Canonical order: per grammar
Animatable: no
Animation type: discrete

The position property determines which of the positioning schemes is used to calculate the position of a box. Values other than static make the box a positioned box, and cause it to establish an absolute positioning containing block for its descendants. Values have the following meanings:

static
The box is not a positioned box, and is laid out according to the rules of its parent formatting context. The inset properties do not apply.
relative
The box is laid out as for static, then offset from the resulting position. This offsetting is a purely visual effect, and does not affect the size or position of any other box, except insofar as it increases the scrollable overflow area of its ancestors. This positioning scheme is called relative positioning.
sticky
Identical to relative, except that its offsets are automatically adjusted in reference to the nearest ancestor scroll container’s scrollport (as modified by the inset properties) in whichever axes the inset properties are not both auto, to try to keep the box in view within its containing block as the user scrolls. This positioning scheme is called sticky positioning.
absolute
The box is taken out of flow such that it has no impact on the size or position of its siblings and ancestors, and does not participate in its parent’s formatting context.

Instead, the box is positioned and sized solely in reference to its absolute positioning containing block, as modified by the box’s inset properties, see § 4 Absolute Positioning Layout Model. It can overlap in-flow content or other absolutely positioned elements, and is included in the scrollable overflow area of the box that generates is containing block. This positioning scheme is called absolute positioning.

fixed
Same as absolute, except the box is positioned and sized relative to a fixed positioning containing block (usually the viewport in continuous media, or the page area in paged media). The box’s position is fixed with respect to this reference rectangle: when attached to the viewport it does not move when the document is scrolled, and when attached to the page area is replicated on every page when the document is paginated. This positioning scheme is called fixed positioning and is considered a subset of absolute positioning.
Authors may wish to specify fixed in a media-dependent way. For instance, an author may want a box to remain at the top of the viewport on the screen, but not at the top of each printed page. The two specifications may be separated by using an '@media' rule, as in:
@media screen {
    h1#first { position: fixed }
}
@media print {
    h1#first { position: static }
}

A position value of absolute or fixed blockifies the box, causes float to compute to none, and forces the box to establish an independent formatting context.

2.1. Containing Blocks of Positioned Boxes

The containing block of a static, relative, or sticky box is as defined by its formatting context. For fixed and absolute boxes, it is defined as follows:

If the box has position: absolute:
The containing block is established by the nearest ancestor box that establishes an absolute positioning containing block, in the following way:
If the ancestor is not an inline box,
the containing block is formed by the padding edge of the ancestor, unless otherwise specified (for example, see CSS Grid Layout 1 § 9.1 With a Grid Container as Containing Block).
If the ancestor is an inline box,
the containing block is formed by the block-start and inline-start content edges of the first box fragment of the ancestor, and the block-end and inline-end content edges of the last box fragment of the ancestor.

Note: If the ancestor breaks across a line, the “start” position might more end-ward than the “end” position.

If no ancestor establishes one, the absolute positioning containing block is the initial containing block.

Note: Properties that can cause a box to establish an absolute positioning containing block include position, transform, will-change, contain

If the box has position: fixed:
The containing block is established by the nearest ancestor box that establishes an fixed positioning containing block, with the bounds of the containing block determined identically to the absolute positioning containing block.

Note: Properties that can cause a box to establish a fixed positioning containing block include transform, will-change, contain

If no ancestor establishes one, the fixed positioning containing block is:

Note: As a result, parts of fixed-positioned boxes that extend outside the initial containing block/page area cannot be scrolled to and will not print.

With no positioning, the containing blocks (C.B.) in the following document:

<!DOCTYPE html>
<html>
    <head>
        <title>Illustration of containing blocks</title>
    </head>
    <body id="body">
        <div id="div1">
        <p id="p1">This is text in the first paragraph...</p>
        <p id="p2">This is text <em id="em1"> in the
        <strong id="strong1">second</strong> paragraph.</em></p>
        </div>
    </body>
</html>

are established as follows:

For box generated by C.B. is established by
html initial C.B. (UA-dependent)
body html
div1 body
p1 div1
p2 div1
em1 p2
strong1 p2

If we position "div1":

#div1 { position: absolute; left: 50px; top: 50px }

its containing block is no longer "body"; it becomes the initial containing block (since there are no other positioned ancestor boxes).

If we position "em1" as well:

#div1 { position: absolute; left: 50px; top: 50px }
#em1  { position: absolute; left: 100px; top: 100px }

the table of containing blocks becomes:

For box generated by C.B. is established by
html initial C.B. (UA-dependent)
body html
div1 initial C.B.
p1 div1
p2 div1
em1 div1
strong1 em1

By positioning "em1", its containing block becomes the nearest positioned ancestor box (i.e., that generated by "div1").

3. Positioning Coordinates

The precise location of a positioned box is controlled by the inset properties: the physical inset properties top, right, bottom, left; the flow-relative inset properties inset-block-start, inset-inline-start, inset-block-end, and inset-inline-end; and their shorthands, inset-block, inset-inline, and inset.

The interpretation of these inset properties varies by positioning scheme:

3.1. Box Insets: the top, right, bottom, left, inset-block-start, inset-inline-start, inset-block-end, and inset-inline-end properties

Name: top, right, bottom, left, inset-block-start, inset-inline-start, inset-block-end, inset-inline-end
Value: auto | <length-percentage>
Initial: auto
Applies to: positioned elements
Inherited: no
Percentages: refer to size of containing block; see prose
Computed value: the keyword auto or a computed <length-percentage> value
Canonical order: per grammar
Animation type: by computed value type

These inset properties represent an inward “inset” on the corresponding side of the box (with respect to the box’s own writing mode; see CSS Writing Modes 3 § 6 Abstract Box Terminology). For example, top represents a downward inset of the top edge. The physical and flow-relative properties interact as defined in [CSS-LOGICAL-1]. Values have the following meanings:

<length>
The inset is a fixed distance from the reference edge. Negative values are allowed.
<percentage>
The inset is a percentage relative to the containing block’s size in the corresponding axis (e.g. width for left or right, height for top and bottom). For sticky positioned boxes, the inset is instead relative to the relevant scrollport’s size. Negative values are allowed.
auto
Represents an unconstrained inset; the exact meaning depends on the positioning scheme.

Note: For fixed positioned elements, using large values or negative values can easily move elements outside the viewport and make the contents unreachable through scrolling or other means.

3.2. Box Insets Shorthands: the inset-block, inset-inline, and inset properties

Name: inset-block, inset-inline
Value: <top>{1,2}
Initial: auto
Applies to: positioned elements
Inherited: no
Percentages: see individual properties
Computed value: see individual properties
Canonical order: per grammar
Animation type: by computed value type

The inset-block and inset-inline properties are shorthand properties for setting inset-block-start + inset-block-end or inset-inline-start + inset-inline-end, respectively, in a single declaration. The first component value sets the start side, the second sets the end; if omitted, the second value defaults to the first.

Name: inset
Value: <top>{1,4}
Initial: auto
Applies to: positioned elements
Inherited: no
Percentages: see individual properties
Computed value: see individual properties
Canonical order: per grammar
Animation type: by computed value type

The inset property is a shorthand property that sets all of the inset properties in a single declaration, assigning values to the longhands representing each side exactly as the margin property does for its longhands.

By default, the inset property values are assigned to the corresponding physical longhand propertiestop, right, bottom, and leftwhich for historical reasons do not have an inset- prefix. This matches the behavior of other "4 values assigned to sides" properties, such as margin.

Allowing properties such as this to resolve to the flow-relative longhands is under discussion in [CSS-LOGICAL-1].

Yes, we understand it’s a little confusing that inset doesn’t expand to any inset-* properties.

3.3. Relative Positioning

For a relatively positioned box, the inset properties move the box inward from the respective edge, without changing its size. left moves the box to the right, right moves it to the left, etc. Since boxes are not split or stretched as a result of relative positioning opposing used values in a given axis must be negations of each other:

The following three rules are equivalent, and shift the box 1em to the left:

div.a8 { position: relative; direction: ltr; left: -1em; right: auto }
div.a8 { position: relative; direction: ltr; left: auto; right: 1em }
div.a8 { position: relative; direction: ltr; left: -1em; right: 5em }

If specified on a table-row-group, table-header-group, table-footer-group, or table-row box the shift affects all the contents of the box, including all table cells that originate in the affected row, but not those that don’t.

Note: Since position does not apply to table-column-group or table-column boxes, they are not affected by relative positioning.

3.4. Sticky positioning

Sticky positioning is similar to relative positioning except the offsets are automatically calculated in reference to the nearest scrollport.

For a sticky positioned box, the inset properties represent insets from the respective edges of the nearest scrollport, defining the sticky view rectangle used to constrain the box’s position. (For this purpose an auto value represents a zero inset.) If this results in a sticky view rectangle size in any axis less than the size of the border box of the sticky box in that axis, then the effective end-edge inset in the affected axis is reduced (possibly becoming negative) to bring the sticky view rectangle’s size up to the size of the border box in that axis (where end is interpreted relative to the writing mode of the containing block).

For example, if the nearest scrollport is 300px tall, the sticky box’s border box is 200px tall, and it has top: 20px, then the top-edge inset of the nearest scrollport is 20px, and the bottom-edge inset is 0px, yielding a sticky view rectangle that is 280px tall.

But if the nearest scrollport were only 100px tall, then the effective bottom-edge inset becomes -120px, resulting in a sticky view rectangle that’s 200px tall, enough to fully contain the margin box of the sticky box.

For each side of the box, if the corresponding inset property is not auto, and the corresponding border edge of the box would be outside the corresponding edge of the sticky view rectangle, then the box must be visually shifted (as for relative positioning) to be inward of that sticky view rectangle edge, insofar as it can while its position box remains contained within its containing block. The position box is its margin box, except that for any side for which the distance between its margin edge and the corresponding edge of its containing block is less than its corresponding margin, that distance is used in place of that margin.

Note: A sticky positioned element with a non-auto top value and an auto bottom value will only ever be pushed down by sticky positioning; it will never be offset upwards.

Note: Multiple sticky positioned boxes in the same container are offset independently, and therefore might overlap.

3.4.1. Scroll Position of Sticky-Positioned Boxes

For the purposes of any operation targeting the scroll position of a sticky positioned element (or one of its descendants), the sticky positioned element must be considered to be positioned at its initial (non-offsetted) position.

For example, if a user clicks a link targeting a sticky-positioned element, even if the element’s nearest scrollport is currently scrolled such that the sticky positioned element is offset from its initial position, the scrollport will be scrolled back so that the element’s initial position is visible.

3.5. Absolute (and Fixed) Positioning

For an absolutely positioned box, the inset properties effectively reduce the containing block into which it is sized and positioned by the specified amounts.

If only one inset property in a given axis is auto, it is set to zero. If both inset properties in a given axis are auto, then, depending on the box’s self-alignment property in the relevant axis (treating normal as start and any distributed, baseline, or stretch alignment value as its fallback alignment):

for self-start alignment or its equivalent
Set its start-edge inset property to the static position, and its end-edge inset property to zero.
for self-end alignment or its equivalent
Set its end-edge inset property to the static position, and its start-edge inset property to zero.
for center alignment
Let start distance be the distance from the center of its static-position rectangle to the start edge of its containing block, and end distance be the distance from the center of its static-position rectangle to the end edge of its containing block. If start distance is less than or equal to end distance, then set the start-edge inset property to zero, and set the end-edge inset property to (containing block size - 2 × |start distance|); otherwise, set the end-edge inset property to zero and the start-edge inset property to (containing block size - 2 × |end distance|).

If these adjustments result in an effective containing block size in any axis less than zero, then the weaker inset in the affected axis is reduced (possibly becoming negative) to bring that size up to zero. In the case that only one inset is auto, that is the weaker inset; otherwise the weaker inset is the inset of the end edge (where end is interpreted relative to the writing mode of the containing block).

Note: Sizing and positioning of the absolutely positioned box into this inset-modified containing block is as described in § 4 Absolute Positioning Layout Model.

If its self-alignment property in an axis is normal, then the resolved value of its weaker inset in that axis is the value necessary to match that edge of its inset-modified containing block to the corresponding edge of its margin box after layout. (Otherwise the resolved value is the used value described above.)

3.5.1. Resolving Automatic Insets: the “Static Position Rectangle”

When both inset properties in a given axis are auto, they are resolved into a static position by aligning the box into its static-position rectangle, an alignment container derived from the formatting context the box would have participated in if it were position: static (independent of its actual containing block). The static position represents an approximation of the position the box would have had if it were position: static.

Block Layout
The static positions of a block-level box are defined in [CSS2] Chapter 10. The static-position rectangle is a zero-thickness rectangle spanning between the inline-axis sides of the box’s static-position containing block (see CSS2§10.3.7); and positioned at its block-start static position (see CSS2§10.6.4).

Note: In block layout the static-position rectangle corresponds to the position of the “hypothetical box” described in CSS2.1§10.3.7. Since it has no alignment properties, CSS2.1 always uses a block-start inline-start alignment of the absolutely-positioned box within the static-position rectangle.

Inline Layout
The static positions of an inline-level box are defined in [CSS2] Chapter 10. The static-position rectangle is a zero-thickness rectangle spanning between the line-over/line-under sides of the line box that would have contained its “hypothetical box” (see CSS2§10.3.7); and positioned at its inline-start static position.
Flex Layout
The static-position rectangle of the child of a flex container corresponds to the content edges of the flex container. See static position of a grid container child in [CSS-FLEXBOX-1].
Grid Layout
By default, the static-position rectangle of the child of a grid container corresponds to the content edges of the grid container. However, if that grid container also establishes the box’s actual containing block, then the grid area specified by the grid-placement properties establishes its static-position rectangle instead. See the static position of a grid container child in [CSS-GRID-1].

Finding the static position and the static position rectangle assumes that both float and clear have their initial values, and can require assuming a different hypothetical value for display as well. Additionally, the containing block of fixed positioned elements is assumed to be the initial containing block instead of the viewport, and all scroll containers should be assumed to be scrolled to their initial scroll position. Lastly, all auto margins on the box itself are treated as zero.

3.5.2. Fragmenting Absolutely-positioned Elements

In a fragmented flow, an absolutely positioned box is positioned relative to its containing block ignoring any fragmentation breaks (as if the flow were continuous). The box may subsequently be broken over several fragmentation containers.

For absolutely positioned content in paged media that resolves to a position on a page other than the page being laid out (the current page), or resolves to a position on the current page that has already been rendered for printing, printers may place the content:

Note: A block-level element that is split over several pages can have a different width on each page, and there may be device-specific limits.

User agents must not paginate the content of fixed-positioned boxes.

Note: User agents might print invisible content in other ways. See CSS Paged Media 3 § 3.2 Content outside the page box.

4. Absolute Positioning Layout Model

Absolute positioning not only takes a box out of flow, but also lays it out in its containing block (after the final size of the containing block has been determined) according to the absolute positioning layout model:

  1. First, its inset-modified containing block is calculated, defining its available space. (See § 3.5 Absolute (and Fixed) Positioning.) Because an absolutely positioned box can have no effect on the size of its containing block, its available space is always definite.
  2. Next, its width and height are resolved against this definite available space, as its preferred size capped by its maximum size (if any), floored by its minimum size. See § 4.1 Automatic Sizes of Absolutely-Positioned Boxes. Percentages, however, are resolved against the original containing block size.
  3. Then, the value of any auto margins are calculated, see § 4.2 Auto Margins of Absolutely-Positioned Boxes.
  4. Lastly, its margin box is aligned within the inset-modified containing block as defined by its self-alignment properties.

4.1. Automatic Sizes of Absolutely-Positioned Boxes

The automatic size of an absolutely positioned box is resolved against its inset-modified containing block as follows (treating auto margins as zero):

If its self-alignment property in the relevant axis is stretch
Or if it is normal and the box is non-replaced, not a table wrapper box, and has no auto inset in the relevant axis

Its automatic size is its stretch-fit size.

Otherwise

Its automatic size is its fit-content size.

However, if the box has an aspect-ratio, then an automatic size in the ratio-dependent axis is instead resolved as a max-content size. When both axes have an automatic size, if only one axis has an auto inset then that axis is the ratio-dependent axis, else the block axis is the ratio-dependent axis. An automatic size in the ratio-determining axis is determined as above.

The automatic minimum size of an absolutely-positioned box is always zero.

4.2. Auto Margins of Absolutely-Positioned Boxes

If either inset property in the relevant axis is auto, then any auto margins resolve to zero.

Otherwise, the remaining space is calculated as the size of its inset-modified containing block in the relevant axis minus the box’s used size in the relevant axis, and this remaining space is divided among any auto margins in the relevant axis. However, (all with respect to the writing mode of the containing block), if in the inline axis the remaining space is negative and both margins are auto, the start margin resolves to zero and the end margin receives the remaining space.

5. Old Absolute Positioning Layout Model

This section is being replaced with the new § 4 Absolute Positioning Layout Model section. It is preserved here for comparison: both models should yield the same result in horizontal writing modes when the box’s self-alignment is normal.

5.1. The Width of Absolutely-Positioned, Non-Replaced Elements

The constraint that determines the used values for these elements is:

left + margin-left + border-left-width + padding-left + width + padding-right + border-right-width + margin-right + right = width of containing block

If all three of left, width, and right are auto: First set any auto values for margin-left and margin-right to 0. Then, if the direction property of the element establishing the static-position containing block is ltr set left to the static position and apply rule number three below; otherwise, set right to the static-position and apply rule number one below.

If none of the three is auto: If both margin-left and margin-right are auto, solve the equation under the extra constraint that the two margins get equal values, unless this would make them negative, in which case when direction of the containing block is ltr (rtl), set margin-left (margin-right) to 0 and solve for margin-right (margin-left). If one of margin-left or margin-right is auto, solve the equation for that value. If the values are over-constrained, ignore the value for left (in case the direction property of the containing block is rtl) or right (in case direction is ltr) and solve for that value.

Otherwise, set auto values for margin-left and margin-right to 0, and pick one of the following six rules that apply.

  1. If left and width are auto and right is not auto, then the width is shrink-to-fit. Then solve for left.
  2. If left and right are auto and width is not auto, then if the direction property of the element establishing the static-position containing block is ltr set left to the static-position, otherwise set right to the static-position. Then solve for left (if direction is rtl) or right (if direction is ltr).
  3. If width and right are auto and left is not auto, then the width is shrink-to-fit. Then solve for right.
  4. If left is auto, width and right are not auto, then solve for left.
  5. If width is auto, left and right are not auto, then solve for width.
  6. If right is auto, left and width are not auto, then solve for right.
Summary of rules for dir=ltr in horizontal writing modes
Is auto? Result
left width right margin-left margin-right
any
  • auto margins → zero
  • left → static pos
  • width → shrink-to-fit
  • right → solve
auto margin → free space
  • margins split positive free space
  • right margin gets negative free space
treat right as auto
any
  • auto margins → zero
  • left → static pos
  • width → as specified
  • right → solve
any
  • auto margins → zero
  • left → solve
  • width → shrink-to-fit
  • right → as specified
any
  • auto margins → zero
  • left → as specified
  • width → shrink-to-fit
  • right → solve
any
  • auto margins → zero
  • solve for auto

5.2. The width of absolute or fixed positioned, replaced elements

If height and width both have computed values of auto and the element also has an intrinsic width, then that intrinsic width is the used value of width.

If height and width both have computed values of auto and the element has no intrinsic width, but does have an intrinsic height and intrinsic ratio; or if width has a computed value of auto, height has some other computed value, and the element does have an intrinsic ratio; then the used value of width is:

(used height) * (intrinsic ratio)

If height and width both have computed values of auto, the element has an intrinsic ratio but no intrinsic height or width, and the containing block’s width does not itself depend on the replaced element’s width, then the used value of width is calculated from the constraint equation used for block-level, non-replaced elements in normal flow.

Otherwise, if width has a computed value of auto, and the element has an intrinsic width, then that intrinsic width is the used value of width.

Otherwise, if width has a computed value of auto, but none of the conditions above are met, and then the used value of width becomes 300px. If 300px is too wide to fit the device, user agents should use the width of the largest rectangle that has a 2:1 ratio and fits the device instead.

After establishing the width, in order to position the replaced element, apply the following rules as appropriate.

  1. If both left and right have the value auto, and if the direction property of the element establishing the static-position containing block is ltr, set left to the static position and solve for right; else if direction is rtl, set right to the static position and solve for left.
  2. If left is auto and right is not auto, replace any auto on margin-left or margin-right with 0, then solve for left.
  3. If right is auto and left is not auto, replace any auto on margin-left or margin-right with 0, then solve for right.
  4. If at this point both margin-left and margin-right are still auto, solve the equation under the extra constraint that the two margins must get equal values, unless this would make them negative, in which case when the direction of the containing block is ltr (rtl), set margin-left (margin-right) to 0 and solve for margin-right (margin-left).
  5. If at this point there is an auto remaining, solve the equation for that value.
  6. If at this point the values are over-constrained, ignore the value for either left (in case the direction property of the containing block is rtl) or right (in case direction is ltr) and solve for that value.

5.3. The Height Of Absolutely Positioned, Non-Replaced Elements

For absolutely positioned elements, the used values of the vertical dimensions must satisfy this constraint:

top + margin-top + border-top-width + padding-top + height + padding-bottom + border-bottom-width + margin-bottom + bottom = height of containing block

If all three of top, height, and bottom are auto: First set any auto values for margin-top and margin-bottom to 0, then set top to the static position, and finally apply rule number three below.

If none of the three are auto: If both margin-top and margin-bottom are auto, solve the equation under the extra constraint that the two margins get equal values. If one of margin-top or margin-bottom is auto, solve the equation for that value. If the values are over-constrained, ignore the value for bottom and solve for that value.

Otherwise, set auto values for margin-top and margin-bottom to 0, and pick one of the following six rules that apply.

  1. If top and height are auto and bottom is not auto, then the height is based on the Auto heights for block formatting context roots, and solve for top.

  2. If top and bottom are auto and height is not auto, then set top to the static position, then solve for bottom.

  3. If height and bottom are auto and top is not auto, then the height is based on the Auto heights for block formatting context roots, and solve for bottom.

  4. If top is auto, height and bottom are not auto, then solve for top.

  5. If height is auto, top and bottom are not auto, then solve for height.

  6. If bottom is auto, top and height are not auto, then solve for bottom.

5.4. The Height Of Absolutely Positioned, Replaced Elements

If height and width both have computed values of auto and the element also has an intrinsic height, then that intrinsic height is the used value of height.

Otherwise, if height has a computed value of auto and the element has an intrinsic ratio then the used value of height is:

(used width) / (intrinsic ratio)

Otherwise, if height has a computed value of auto and the element has an intrinsic height, then that intrinsic height is the used value of height.

Otherwise, if height has a computed value of auto, but none of the conditions above are met, then the used value of height must be set to the height of the largest rectangle that has a 2:1 ratio, has a height not greater than 150px, and has a width not greater than the device width.

After establishing the height, in order to position the replaced element, apply the following rules as appropriate.

  1. If both top and bottom have the value auto, replace top with the element’s static position.

  2. If bottom is auto, replace any auto on margin-top or margin-bottom with 0.

  3. If at this point both margin-top and margin-bottom are still auto, solve the equation under the extra constraint that the two margins must get equal values.

  4. If at this point there is only one auto remaining, solve the equation for that value.

  5. If at this point the values are over-constrained, ignore the value for bottom and solve for that value.

6. Informative Comparison of Normal Flow, Floats, and Positioning

This section is not normative.

To illustrate the differences between normal flow, relative positioning, floats, and absolute positioning, we provide a series of examples based on the following HTML:

<!DOCTYPE html>
<html>
    <head>
        <title>Comparison of positioning schemes</title>
        <style>
          body { display: block; font-size:12px; line-height: 200%;
                  width: 400px; height: 400px }
          p    { display: block }
          span { display: inline }
        </style>
    </head>
    <body>
    <p>
        Beginning of p contents.
        <span id="outer"> Start of outer contents.
        <span id="inner"> Inner contents.</span>
        End of outer contents.</span>
        End of p contents.
    </p>
    </body>
</html>

The final positions of boxes generated by the outer and inner elements vary in each example. In each illustration, the numbers to the left of the illustration indicate the normal flow position of the double-spaced (for clarity) lines.

Note: The diagrams in this section are illustrative and not to scale. They are meant to highlight the differences between the various positioning schemes, and are not intended to be reference renderings of the examples given.

6.1. Normal Flow Example

Consider the following CSS declarations for outer and inner that do not alter the normal flow of boxes:

#outer { color: red }
#inner { color: blue }

The P element contains all inline content: anonymous inline text and two SPAN elements. Therefore, all of the content will be laid out in an inline formatting context, within a containing block established by the P element, producing something like:

Image illustrating the normal flow of text between parent and sibling boxes.
All of the text within the P’s containing block flows together as continuous text, even though it’s located in separated nested elements.

6.2. Relative Positioning Example

To see the effect of relative positioning, we specify:

#outer { position: relative; top: -12px; color: red }
#inner { position: relative; top: 12px; color: blue }

Text flows normally up to the outer element. The outer text is then flowed into its normal flow position and dimensions at the end of line 1. Then, the inline boxes containing the text (distributed over three lines) are shifted as a unit by -12px (upwards).

The contents of inner, as a child of outer, would normally flow immediately after the words "of outer contents" (on line 1.5). However, the inner contents are themselves offset relative to the outer contents by 12px (downwards), back to their original position on line 2.

Note that the content following outer is not affected by the relative positioning of outer.

The result is identical to normal flow, except that the "outer" text is shifted 12px upward, without affecting the flow of the "body" or "inner" text.

Note also that had the offset of outer been -24px, the text of outer and the body text would have overlapped.

6.3. Floating Example

Now consider the effect of floating the inner element’s text to the right by means of the following rules:

#outer { color: red }
#inner { float: right; width: 130px; color: blue }

Text flows normally up to the inner box, which is pulled out of the flow and floated to the right margin (its width has been assigned explicitly). Line boxes to the left of the float are shortened, and the document’s remaining text flows into them.

Image illustrating the effects of floating a box.
The "inner" text lays out in an independent box on the right, causing the remaining "body" and "outer" text to flow around it.

To show the effect of the clear property, we add a sibling element to the example:

<!DOCTYPE html>
<html>
    <head>
        <title>Comparison of positioning schemes II</title>
        <style>
          #inner { float: right; width: 130px; color: blue }
          #sibling { color: red }
        </style>
    </head>
    <body>
    <p>
        Beginning of p contents.
        <span id="outer"> Start of outer contents.
        <span id="inner"> Inner contents.</span>
        <span id="sibling"> Sibling contents.</span>
        End of outer contents.</span>
        End of p contents.
    </p>
    </body>
</html>

These styles cause the inner box to float to the right, as before, and the document’s remaining text to flow into the vacated space:

Image illustrating the effects of floating a box without setting the clear property to control the flow of text around the box.
Identical to the previous example, save that there is now "sibling" text flowing with the "body" and "outer" text.

However, if the clear property on the sibling element is set to right (i.e., the generated sibling box will not accept a position next to floating boxes to its right), the sibling content begins to flow below the float:

#inner { float: right; width: 130px; color: blue }
#sibling { clear: right; color: red }
Image illustrating the effects of floating an element with setting the clear property to control the flow of text around the element.
Now the "sibling" text moves down to below the "inner" text’s box, leaving blank space behind. The text following the "sibling" text flows after it as normal.

6.4. Absolute Positioning Example

Next, we consider the effect of absolute positioning. Consider the following CSS declarations for outer and inner:

#outer {
    position: absolute;
    top: 200px; left: 200px;
    width: 200px;
    color: red;
}
#inner { color: blue }

which cause the top of the outer box to be positioned with respect to its containing block. The containing block for a positioned box is established by the nearest positioned ancestor (or, if none exists, the initial containing block, as in our example). The top side of the outer box is 200px below the top of the containing block and the left side is 200px from the left side. The child box of outer is flowed normally with respect to its parent.

Image illustrating the effects of absolutely positioning a box.
All of the text within #outer (the "outer" and "inner" text) moves down to an independent box in the lower right corner. The two halves of "body" text flow together.

The following example shows an absolutely positioned box that is a child of a relatively positioned box. Although the parent outer box is not actually offset, setting its position property to relative means that its box may serve as the containing block for positioned descendants. Since the outer box is an inline box that is split across several lines, the first inline box’s top and left edges (depicted by thick dashed lines in the illustration below) serve as references for top and left offsets.

#outer {
    position: relative;
    color: red
}
#inner {
    position: absolute;
    top: 200px; left: -100px;
    height: 130px; width: 130px;
    color: blue;
}

This results in something like the following:

Image illustrating the effects of absolutely positioning a box with respect to a containing block.
The "inner" text is positioned in an independent box, relative to the top-left corner of the start of the "outer" text.

If we do not position the outer box:

#outer { color: red }
#inner {
    position: absolute;
    top: 200px; left: -100px;
    height: 130px; width: 130px;
    color: blue;
}

the containing block for inner becomes the initial containing block (in our example). The following illustration shows where the inner box would end up in this case.

Image illustrating the effects of absolutely positioning a box with respect to a containing block established by a normally positioned parent.
Same as before, except now the "inner text" is positioned relative to the top-left corner of the page itself.

Relative and absolute positioning may be used to implement change bars, as shown in the following example. The following fragment:

<p style="position: relative; margin-right: 10px; left: 10px;">
  I used two red hyphens to serve as a change bar. They
  will "float" to the left of the line containing THIS
  <span style="position: absolute; top: auto; left: -1em; color: red;">--</span>
  word.
</p>

might result in something like:

Image illustrating the use of floats to create a changebar effect.
The two red hyphens, indicating a change, sit in the left margin of the page on the line containing the word "THIS", regardless of what line that ends up being.

First, the paragraph (whose containing block sides are shown in the illustration) is flowed normally. Then it is offset 10px from the left edge of the containing block (thus, a right margin of 10px has been reserved in anticipation of the offset). The two hyphens acting as change bars are taken out of the flow and positioned at the current line (due to 'top: auto'), -1em from the left edge of its containing block (established by the P in its final position). The result is that the change bars seem to "float" to the left of the current line.

7. Acknowledgments

This module would not have been possible without input and support from many helpful people. Thanks to Rossen Atanassov, Bert Bos, Oriol Brufau, Tantek Çelik, Arron Eicholz Sylvain Galineau, John Jansen, Chris Jones, Ian Kilpatrick, Anton Prowse.

Changes

The following significant changes were made since the 16 Decemer 2021 Working Draft:

The following significant changes were made since the 19 May 2020 Working Draft:

The following significant changes were made since the 17 May 2016 Working Draft:

Privacy and Security Considerations

This specification introduces no new privacy considerations.

If an attacker is able to inject arbitrary CSS, positioned layout can make it easier to position elements the attacker has control of over arbitrary other elements of the page, potentially tricking users of the page. (There are many routes to this attack: negative margin, transform, etc. Don’t let people apply arbitrary CSS to bits of your page.)

position: fixed can allow a page to emulate modal dialogs, potentially tricking a user into thinking they’re interacting with the user agent and entering in sensitive information that they page can then capture. User agents must ensure that their native dialogs are positioned in ways that the page cannot emulate; in particular, that at least some of the dialog is outside the "poisoned pixels" that web content can paint to.

Conformance

Document conventions

Conformance requirements are expressed with a combination of descriptive assertions and RFC 2119 terminology. The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in the normative parts of this document are to be interpreted as described in RFC 2119. However, for readability, these words do not appear in all uppercase letters in this specification.

All of the text of this specification is normative except sections explicitly marked as non-normative, examples, and notes. [RFC2119]

Examples in this specification are introduced with the words “for example” or are set apart from the normative text with class="example", like this:

This is an example of an informative example.

Informative notes begin with the word “Note” and are set apart from the normative text with class="note", like this:

Note, this is an informative note.

Advisements are normative sections styled to evoke special attention and are set apart from other normative text with <strong class="advisement">, like this: UAs MUST provide an accessible alternative.

Conformance classes

Conformance to this specification is defined for three conformance classes:

style sheet
A CSS style sheet.
renderer
A UA that interprets the semantics of a style sheet and renders documents that use them.
authoring tool
A UA that writes a style sheet.

A style sheet is conformant to this specification if all of its statements that use syntax defined in this module are valid according to the generic CSS grammar and the individual grammars of each feature defined in this module.

A renderer is conformant to this specification if, in addition to interpreting the style sheet as defined by the appropriate specifications, it supports all the features defined by this specification by parsing them correctly and rendering the document accordingly. However, the inability of a UA to correctly render a document due to limitations of the device does not make the UA non-conformant. (For example, a UA is not required to render color on a monochrome monitor.)

An authoring tool is conformant to this specification if it writes style sheets that are syntactically correct according to the generic CSS grammar and the individual grammars of each feature in this module, and meet all other conformance requirements of style sheets as described in this module.

Partial implementations

So that authors can exploit the forward-compatible parsing rules to assign fallback values, CSS renderers must treat as invalid (and ignore as appropriate) any at-rules, properties, property values, keywords, and other syntactic constructs for which they have no usable level of support. In particular, user agents must not selectively ignore unsupported component values and honor supported values in a single multi-value property declaration: if any value is considered invalid (as unsupported values must be), CSS requires that the entire declaration be ignored.

Implementations of Unstable and Proprietary Features

To avoid clashes with future stable CSS features, the CSSWG recommends following best practices for the implementation of unstable features and proprietary extensions to CSS.

Non-experimental implementations

Once a specification reaches the Candidate Recommendation stage, non-experimental implementations are possible, and implementors should release an unprefixed implementation of any CR-level feature they can demonstrate to be correctly implemented according to spec.

To establish and maintain the interoperability of CSS across implementations, the CSS Working Group requests that non-experimental CSS renderers submit an implementation report (and, if necessary, the testcases used for that implementation report) to the W3C before releasing an unprefixed implementation of any CSS features. Testcases submitted to W3C are subject to review and correction by the CSS Working Group.

Further information on submitting testcases and implementation reports can be found from on the CSS Working Group’s website at http://www.w3.org/Style/CSS/Test/. Questions should be directed to the public-css-testsuite@w3.org mailing list.

Index

Terms defined by this specification

Terms defined by reference

References

Normative References

[CSS-ALIGN-3]
Elika Etemad; Tab Atkins Jr.. CSS Box Alignment Module Level 3. 24 December 2021. WD. URL: https://www.w3.org/TR/css-align-3/
[CSS-BACKGROUNDS-3]
Bert Bos; Elika Etemad; Brad Kemper. CSS Backgrounds and Borders Module Level 3. 26 July 2021. CR. URL: https://www.w3.org/TR/css-backgrounds-3/
[CSS-BOX-4]
Elika Etemad. CSS Box Model Module Level 4. 21 April 2020. WD. URL: https://www.w3.org/TR/css-box-4/
[CSS-BREAK-4]
Rossen Atanassov; Elika Etemad. CSS Fragmentation Module Level 4. 18 December 2018. WD. URL: https://www.w3.org/TR/css-break-4/
[CSS-CASCADE-5]
Elika Etemad; Miriam Suzanne; Tab Atkins Jr.. CSS Cascading and Inheritance Level 5. 13 January 2022. CR. URL: https://www.w3.org/TR/css-cascade-5/
[CSS-DISPLAY-3]
Tab Atkins Jr.; Elika Etemad. CSS Display Module Level 3. 3 September 2021. CR. URL: https://www.w3.org/TR/css-display-3/
[CSS-FLEXBOX-1]
Tab Atkins Jr.; et al. CSS Flexible Box Layout Module Level 1. 19 November 2018. CR. URL: https://www.w3.org/TR/css-flexbox-1/
[CSS-GRID-1]
Tab Atkins Jr.; et al. CSS Grid Layout Module Level 1. 18 December 2020. CR. URL: https://www.w3.org/TR/css-grid-1/
[CSS-GRID-2]
Tab Atkins Jr.; Elika Etemad; Rossen Atanassov. CSS Grid Layout Module Level 2. 18 December 2020. CR. URL: https://www.w3.org/TR/css-grid-2/
[CSS-INLINE-3]
Dave Cramer; Elika Etemad; Steve Zilles. CSS Inline Layout Module Level 3. 27 August 2020. WD. URL: https://www.w3.org/TR/css-inline-3/
[CSS-LOGICAL-1]
Rossen Atanassov; Elika Etemad. CSS Logical Properties and Values Level 1. 27 August 2018. WD. URL: https://www.w3.org/TR/css-logical-1/
[CSS-OVERFLOW-3]
David Baron; Elika Etemad; Florian Rivoal. CSS Overflow Module Level 3. 23 December 2021. WD. URL: https://www.w3.org/TR/css-overflow-3/
[CSS-PAGE-3]
Elika Etemad; Simon Sapin. CSS Paged Media Module Level 3. 18 October 2018. WD. URL: https://www.w3.org/TR/css-page-3/
[CSS-PAGE-FLOATS-3]
Johannes Wilm. CSS Page Floats. 15 September 2015. WD. URL: https://www.w3.org/TR/css-page-floats-3/
[CSS-SIZING-3]
Tab Atkins Jr.; Elika Etemad. CSS Box Sizing Module Level 3. 17 December 2021. WD. URL: https://www.w3.org/TR/css-sizing-3/
[CSS-SIZING-4]
Tab Atkins Jr.; Elika Etemad; Jen Simmons. CSS Box Sizing Module Level 4. 20 May 2021. WD. URL: https://www.w3.org/TR/css-sizing-4/
[CSS-TABLES-3]
François Remy; Greg Whitworth; David Baron. CSS Table Module Level 3. 27 July 2019. WD. URL: https://www.w3.org/TR/css-tables-3/
[CSS-TRANSFORMS-1]
Simon Fraser; et al. CSS Transforms Module Level 1. 14 February 2019. CR. URL: https://www.w3.org/TR/css-transforms-1/
[CSS-VALUES-3]
Tab Atkins Jr.; Elika Etemad. CSS Values and Units Module Level 3. 6 June 2019. CR. URL: https://www.w3.org/TR/css-values-3/
[CSS-VALUES-4]
Tab Atkins Jr.; Elika Etemad. CSS Values and Units Module Level 4. 19 October 2022. WD. URL: https://www.w3.org/TR/css-values-4/
[CSS-WRITING-MODES-3]
Elika Etemad; Koji Ishii. CSS Writing Modes Level 3. 10 December 2019. REC. URL: https://www.w3.org/TR/css-writing-modes-3/
[CSS-WRITING-MODES-4]
Elika Etemad; Koji Ishii. CSS Writing Modes Level 4. 30 July 2019. CR. URL: https://www.w3.org/TR/css-writing-modes-4/
[CSS2]
Bert Bos; et al. Cascading Style Sheets Level 2 Revision 1 (CSS 2.1) Specification. 7 June 2011. REC. URL: https://www.w3.org/TR/CSS21/
[CSSOM-1]
Daniel Glazman; Emilio Cobos Álvarez. CSS Object Model (CSSOM). 26 August 2021. WD. URL: https://www.w3.org/TR/cssom-1/
[MEDIAQUERIES-5]
Dean Jackson; et al. Media Queries Level 5. 18 December 2021. WD. URL: https://www.w3.org/TR/mediaqueries-5/
[RFC2119]
S. Bradner. Key words for use in RFCs to Indicate Requirement Levels. March 1997. Best Current Practice. URL: https://datatracker.ietf.org/doc/html/rfc2119

Informative References

[CSS-BREAK-3]
Rossen Atanassov; Elika Etemad. CSS Fragmentation Module Level 3. 4 December 2018. CR. URL: https://www.w3.org/TR/css-break-3/
[CSS-CONTAIN-1]
Tab Atkins Jr.; Florian Rivoal. CSS Containment Module Level 1. 22 December 2020. REC. URL: https://www.w3.org/TR/css-contain-1/
[CSS-WILL-CHANGE-1]
Tab Atkins Jr.. CSS Will Change Module Level 1. 5 May 2022. CR. URL: https://www.w3.org/TR/css-will-change-1/

Property Index

Name Value Initial Applies to Inh. %ages Ani­mat­able Anim­ation type Canonical order Com­puted value
bottom auto | <length-percentage> auto positioned elements no refer to size of containing block; see prose by computed value type per grammar the keyword auto or a computed <length-percentage> value
inset <top>{1,4} auto positioned elements no see individual properties by computed value type per grammar see individual properties
inset-block <top>{1,2} auto positioned elements no see individual properties by computed value type per grammar see individual properties
inset-block-end auto | <length-percentage> auto positioned elements no refer to size of containing block; see prose by computed value type per grammar the keyword auto or a computed <length-percentage> value
inset-block-start auto | <length-percentage> auto positioned elements no refer to size of containing block; see prose by computed value type per grammar the keyword auto or a computed <length-percentage> value
inset-inline <top>{1,2} auto positioned elements no see individual properties by computed value type per grammar see individual properties
inset-inline-end auto | <length-percentage> auto positioned elements no refer to size of containing block; see prose by computed value type per grammar the keyword auto or a computed <length-percentage> value
inset-inline-start auto | <length-percentage> auto positioned elements no refer to size of containing block; see prose by computed value type per grammar the keyword auto or a computed <length-percentage> value
left auto | <length-percentage> auto positioned elements no refer to size of containing block; see prose by computed value type per grammar the keyword auto or a computed <length-percentage> value
position static | relative | absolute | sticky | fixed static all elements except table-column-group and table-column no N/A no discrete per grammar specified keyword
right auto | <length-percentage> auto positioned elements no refer to size of containing block; see prose by computed value type per grammar the keyword auto or a computed <length-percentage> value
top auto | <length-percentage> auto positioned elements no refer to size of containing block; see prose by computed value type per grammar the keyword auto or a computed <length-percentage> value

Issues Index

This section is being replaced with the new § 4 Absolute Positioning Layout Model section. It is preserved here for comparison: both models should yield the same result in horizontal writing modes when the box’s self-alignment is normal.